Posts in Category: Home Improvement Tips

Tips for choosing your exterior paint color

Are you looking for advice on exterior painting and tips for choosing your exterior paint color for your house? You must first know the rules of your  municipality and then follow some ideas on the colors to prefer.

Here’s how to decide the color for the exterior walls of the house, practical tips to avoid making mistakes. Not everyone knows that it is not always possible to choose the color that we like best, especially if it is very bright and lively, because nowadays there are rules to be respected in almost every municipality of residence and which greatly limit the choice.

On the other hand, those who are lucky enough to live in a place like Montclair where there are no restrictions in this regard must still evaluate the colors for exterior houses that best match the high shades of the surrounding landscape.

In general, light shades such as beige, cream, and sand are used to increase the external brightness of the building, especially if it is small, while dark shades such as brown, burgundy, and green are used to suggest a containment idea.

Another factor to take into consideration, and which can help you determine which color is most suitable for your home, are the colors of windows and shutters.

If you have no intention of repainting them, in fact, it is good to choose a paint that matches well, otherwise, you risk creating a contrast that is too strong and unpleasant to the eye. A tip that should not be underestimated is to proceed with the color simulation of the exterior painting of the house.

Just paint a very small part of the facade and try to look at it from afar. This will make it much easier to see if it is to our liking.

But what is quartz painting? Many of you will have heard it before, others will completely ignore the subject, but some will be able to perfect their knowledge, while the second will be able to answer their own questions about it in this paragraph.

The quartz paint is a paint characterized by the presence of small grains of quartz in its interior, very fine grains, the thickness of which and whose consistency is more or less that of the flour.

It is also made up of synthetic resins and water, as well as these grains, which makes it a type of paint that is very easy to apply and very resistant to atmospheric agents and stresses, whether chemical or physical.

In addition to this, its composition allows this paint to be very opaque, therefore very pigmented, and to anchor well to the support, as if to become one with the latter, especially if it is a plaster made of bastard mortar. .

Another characteristic of this type of paint is that it is also suitable for imperfect surfaces, as it is a paint capable of filling the imperfections of the surface so that it appears completely homogeneous and perfectly regular.

As if that were not enough, this painting still has other very attractive characteristics, which mostly concern the functional side, after the practical and aesthetic ones to which the previous characteristics concerned.

In fact, this type of paint prevents the formation of algae, bacteria, and mold, so it is suitable for those places where there is a high level of humidity in the air. Remember, that molds are in fact enemies of health, as they carry bacteria, so it is always good to prevent them.

In addition, it washes very easily, and even when it is dirty if washed, it comes out as new, it is water-repellent and breathable, so it is suitable for any external surface, even exposed to a lot of atmospheric agents.

Advantages and disadvantages of quartz paint

But what are the advantages of quartz painting?

The advantages of this type of paint are those that derive from the characteristics described above, obviously:

– quartz paint is in fact a paint capable of resisting mold and preventing the formation of unhealthy bacteria, which could be a danger not only for the aesthetics of the house but also for the health of the people who live there;

– it is water repellent, therefore it is resistant to atmospheric agents much more than common paints, which makes it very suitable for external walls;

– it is long-lasting, which means that it does not need continuous maintenance or, in any case, additional and close costs;

– it is very easy to apply and homogenizes the surface on which it is applied, which means that everyone can use quartz paint, even when the surface on which it is applied is uneven, successfully, even if you are a beginner.

As for the disadvantages, it must be considered that this type of paint is water repellent, therefore, if used indoors, if poorly used, it could cause the formation of condensation in the presence of a fairly high humidity level, or it could be a problem if you wanted to eliminate since it is very resistant. For the rest, it is a painting that can bring numerous advantages.

Read more about Gikas Painting Service in Montclair:


How we choose the right fertilizer

The plants that we we grow need some essential nutrients. Primary, they get these from the soil to grow and give us wonderful flowers and delicious fruits. Many times, however, the soil does not contain enough nutrients to meet their needs. This situation we need to apply fertilizer, to keep them healthy and strong.

Fertilization is one of the most important cultivation tasks, along with watering, pruning and plant protection. Talking about fertilizer for plants, we are referring to natural or chemical substances. These contributes to the rooting, growth, flowering and fruiting of plants. Using fertilizer on our plants, we enrich the soil with nutrients. Also. it will replenish the elements that are absorbed during the cultivation of plants.

Especially when we have potted plants on our balcony or in our yard, the need of fertilization at regular intervals is even more imperative. So let’s see in detail what are the basic types of fertilizer, when we need to put fertilizer on plants and how to choose the right fertilizer.

The basic types of fertilizers

There are a variety of fertilizer that we can find in the market. These vary depending on their origin and form. Depending on their origin, fertilizers are divided into:

Organic fertilizers

Organic fertilizers come from the decomposition of plant and animal residues. They are approved for use in organic farming, which is why they are often referred to as, organic fertilizers. They can be characterized as manure, compost, seaweed fertilizer, and others that are commercially available.

Organic fertilizers have the advantage that they are environmentally friendly. They also contain organic matter that improves the natural properties of the soil. In addition to providing plants with nutrients, they also improve the ability of the soil to retain water and nutrients.

Chemical fertilizers

This type of fertilizers result from the synthesis of chemical elements through various chemical reactions and are the largest category of fertilizers used by growers. Chemical fertilizers have the advantage that they are lower in cost.

They also offer many possibilities to growers, due to their varied composition, at all stages of cultivation. Examples vary from rhizome and plant growth to fruit set and fruit production.

Organochemical fertilizers

Organochemical fertilizers are a combination of chemical and organic fertilizers. They contain both chemical elements and an amount of organic matter. In other words, organic fertilizers are relatively cheaper than organic fertilizers, have a varied composition and are suitable for many crops, while improving soil characteristics.

What types of fertilizers are there?

In how we choose the right fertilizer, we say depending on the form. You should know that there are granular and crystalline fertilizers that are in solid form. But also you can find fertilizers in liquid form:

Granular fertilizers

These are fertilizers in the form of granules. Granular fertilizers are usually absorbed more gradually by the soil and the root system of plants. In granular fertilizers, each grain contains proportionally all the nutrients of the fertilizer. There are also mixed or blend fertilizers, which have a granular form but in which the raw materials are simply mixed.

Crystalline fertilizers

These are fertilizers in powder form. Crystal fertilizers are supplied in solid form and are water soluble, ie they dissolve very easily in water and are absorbed directly by plants through watering.

Fertilizers in liquid form

Liquid fertilizers are dissolved in water and applied through the irrigation system during watering or by spraying the foliage of the plants. In fact, they are very common in amateur formulations, as because they are water soluble we can very easily apply them with a watering can. Liquid fertilizers have the advantage of immediate absorption especially through sprays, when there are problematic soils.

Elements contained in a fertilizer and numbers on the label

In each fertilizer, either chemical or organic, on the label on the package, three basic numbers are indicated. These indicate the percentage (%) content in the three basic nutrients, in order: nitrogen, phosphorus and potassium.

Nitrogen as a fertilizer for plants promotes rich vegetation, rapid growth, higher height, larger leaf area and intense greenery on the leaves. The addition of phosphorus to plants contributes positively to a number of important functions, such as rapid growth of a strong root system, formation and good growth of flowers and creation of quality fruits and seeds.

The addition of potassium to the plants helps to create quality fruits of the crops, both in size, color and taste, while offering greater resistance of plants to adverse conditions of frost, strong winds, drought.Fertilizers may contain other nutrients that are lower in content such as magnesium, calcium, iron, zinc and boron.

Magnesium and iron help to green the leaves and ensure rich vegetation. Calcium significantly enhances the consistency of the fruit so that it does not soften easily, increases the size of the fruit and improves their quality. Finally, boron and zinc are very important for the flowering and fruiting stage and contribute significantly to improving overall production each year.

How we choose the right fertilizer for plants?

The choice of the appropriate fertilizer depends on many factors such as the type of crop, the soil in which we grow, the growth stage of the plant, the composition and form of the fertilizer, what function of the plant we want to contribute, as well as the economic its cost.

Especially for professional crops, before proceeding with the selection of fertilizer, it is important to do a soil analysis so that we can accurately determine the type of fertilization and the amount of fertilizer that our field needs. Below we list some key features that will help us in choosing the right fertilizer.

Fertilizer to improve plant growth

If we want to help the growth of plants, we use a fertilizer with a high content of nitrogen (N). To enhance the rooting, but also the flowering of the plants, we use fertilizers with high content of phosphorus.

If we want to improve the production and fruiting of the crop, both in quality and quantity, we choose fertilizer with high content of potassium.

Basic fertilization in vegetables and trees

As initial (basic) fertilization in horticultural crops and fruit trees, we usually use granular fertilizers. This is because they are slower to release, meaning they release nutrients over a longer period of time.

They usually contain all three basic nutrients, nitrogen, phosphorus and potassium. In these cases, the fertilizer can be spread throughout the field or placed only at planting sites to reduce costs.

Low cost lubrication

When we want to reduce the cost of fertilizer in relation to the content of nutrients, we usually choose chemical fertilizers. We usually find them in granular form, that are generally cheaper.

Fertilizer for cultivation soils problem

Growing plants in degraded soils, it is necessary to use ecological granular fertilizers. This is the way to improve soil characteristics and their nutrients are more easily absorbed by plants. Also, in degraded soils, leaf spraying (foliar spraying) with nutrients with liquid or water-soluble fertilizers is offered.

Fertilizers for immediate absorption

In case we want immediate absorption of the nutrients, like in the case of calcium to treat the dry top of the tomato or boron for the fruiting of the olive. You should have in mind to choose liquid or water-soluble crystalline fertilizer. The type of these can be applied foliarly by spraying.

Fertilizer for a garden with vegetable

For our vegetable garden, we choose ecological fertilizers. These ones are environmentally friendly and help in the production of good quality fruits.

Fertilizer for pot flowers

For ornamental plants that we have in pots, we choose chemical crystalline or liquid fertilizer. This type dissolves in water and it has good absorption by the plants, without the risk of excessive fertilization.

A secret for the application of fertilizer

Fertilizer provides nutrients that help plants grow. However, there are some cases where we avoid putting fertilizer on plants. One of them is immediately after transplanting, as the plant needs time to adapt.

In addition, we avoid applying fertilizer to plants that are not irrigated. Also,in conditions where the plants are vulnerable. Examples are in periods of very high temperatures or the ones of very low temperatures and frost.

Cleaning of a pumping station

Pumping stations are the places where sewage and rainwater are collected. From there they are transported by pipes and pumps to their destination.

Usually these spaces are located in basements or warehouses. These locations belong to apartment buildings and other buildings.

Sewage and rainwater, which can contain various large objects, accumulate at the bottom and create a layer of solid waste. These can clog pipes, damage pumps and allow the growth of pathogenic microorganisms.

So the cleaning of the pumping station in an apartment building and a detached house is necessary in order not to create problems and to be able to operate properly and safely.

Our company Αποφράξεις Αναγνώστου Κορωπί has all the necessary know-how and experience. These are used for cleaning your pumping station, at a very low cost. We undertake the cleaning of all pumping stations no matter how difficult it is in Athens and Attica.

We make use of latest technologies suction pumps. With these we are pumping all the dirty water from the pumping station area. Then the walls are cleaned with a strong pressure machine. It is often necessary to use a blocking machine to unclog pipe plugs, always at affordable prices.

Finally, our tank trucks safely transport all wastewater to their treatment area.

The cleaning of pumping stations is often associated with the service of pumping water – sewage and disinfection of the space, which contributes particularly to the hygiene of the space.

The sewage transport tanks we have serve pumping stations in apartment buildings, detached houses, factories, hospitals, companies, shops, shopping malls and other businesses.

Parts in a pumping station and how it works

The whole pumping station system consists of the following elements:

  • Pump
  • Water collector
  • Filter
  • Pipes
  • Automation

The pump can be simple or submersible. Also, the water can be collected from a well, river or lake or a rainwater collector (rare).

What are the advantages of using a pumping station in a building?

If properly maintained, then the advantages of using a pump stand, among others:

  • Water autonomy of a building.
  • Providing constant water pressure.
  • Long service life of household appliances that use water, such as washing machines, etc.

Usually the filter is full, as it is loaded with salts and sand. Notice that at first they are not visible to the naked eye. However during use the accumulation blocks the inlet of the pump.

As a result it will not have the correct performance according to specifications. That is when you will call us to proceed with the cleaning of the pumping station with our experienced in this field staff.

Maintenance and cleaning of all types of pump station

We should clean and maintain the pumping station. This steps are vital and care should be taken. If it is not cleaned or maintained properly, serious problems are created in its operation while at the same time its lifespan is significantly reduced.

How is a pumping station cleaned?

If we want to clean properly our pumping station, the evacuation – pumping of the sewage and solid waste that exists in the area is carried out first.

Then, using high pressure presses (water jet), we thoroughly and effectively clean any residue left leaving the pumping station clean in every way.

We also undertake the maintenance of your pump and if necessary its replacement.

Water pumping

During the winter, but sometimes during the summer months, rainfall is very strong. The basements of homes, factories and warehouses are flooded with mud and water. To remove them requires the drastic intervention of a serious water pumping company.

We have the equipment and know-how that enable us to intervene immediately and effectively, removing water and mud in a very short time.

Our equipment includes powerful pumps that suck water at high speed and inject it into our tankers. These have different sizes so that they can move anywhere.

Water pumping due to floods is an emergency and thus takes place almost immediately as it precedes the rest of our services.

Cleaning by water jet

High pressure water jetting is installed in blockage vehicles.These are capable of dissolving any type of material that causes blockage in a well. Generally in clogged pipes of your sewer.

In case of incorrect use, the power of water pressure machines can damage your sewer and even flood.

Therefore the use of the pressure should be done ONLY by specialized, well-trained and experienced obstruction technicians. Also, the use should not be made in the main sewer pipe. It should be limited to auxiliary sewer pipes, external siphons or gutters of the building or house.

Grease trap cleaning

The fat collector must be placed in any professional space that drains a lot of oils or fats into the drain. Its role is to collect and store fats and sediments so that they do not enter the sewer system.

In case they enter, they block the sewerage.They also pollute the water and are responsible for many problems in the biological treatment. It consists of two chambers. The first where the sediments are collected. The second where the lighter fats are collected.

Proper cleaning of the grease trap is necessary at regular intervals to avoid bad odors, blockages and overflows. Our company has been active in the field of blockages for years and has a specialization in the cleaning of fat collectors or as they are sometimes mentioned, fat traps or fat separators.

Sewer cleaning

The proper operation of a sewer depends to a large extent on its proper maintenance and regular cleaning. If these conditions are not met, the chance of blockage and damage is much higher.

In addition, a sewer that is not properly cleaned can become a source of infection and a source of parasites, rodents, etc.

Our company undertakes the cleaning and maintenance of sewers, sewer pipes and networks. This cleaning can be done after emptying the septic tank, or, preferably, at regular intervals.

For sewer cleaning we use powerful pumps that suck the sewage. Then we supply water with high pressure that dissolves all the dirt, mud and anything else that has accumulated in the pipes.

We make use of our special tank vehicles. We transport these aspirated materials  into places where they are processed.

Disinfection of sewers with environmentally friendly products and maintenance of sewers complete the cleaning work.

This work results in a crystal clear sewer, without a trace of contamination.It should works perfectly and the operating time is greatly extended.

See more areas Αποφραξεις Αναγνώστου serve:

10 Colors to paint your living room!

10 Colors to paint your living room!

If a man’s house is his castle, then the living room is the great hall. Painting the right colours is a major thing. It is the room where we can gather with our own people and sit together, having a coffee, and discussing everything that concerns us.

It is the main room we see when we enter the house after a long day. Therefore, it can have a big impact on our psychology, whether we realize it or not. Isn’t it worth a little more attention and care?

The decoration, but also the colors that we will choose, for our living room is definitely a complicated matter, and an opinion above is never unnecessary.

In fact, if you are interested in following the fashion trends, the decoration should take up a lot of your free time, right? And because buying new furniture every time the fashion trend changes is not in the best interest, the simplest solution is a change in the color of the walls. So if you are wondering, “what color should I paint the living room?”, It’s time to discover some very interesting trends.

Living Room Colors: 10 modern & timeless ideas for painting your space!

1. White painting

It is timeless, simple and elegant. It is always in fashion for beautiful lounges with style and signifies the classic. White symbolizes cleanliness, purity and honesty. Also, the white color on the walls is very important because it tends to highlight the surrounding space and make it look bigger. This means that even if your living room is not too big, you can easily make it look more spacious.

This property is also offered by other light shades, such as ocher, mint color, even light gray and beige. So if your exact question is “what color should I paint my living room to look bigger and brighter?”, Now you know.

2. Yellow painting

According to the principles of color therapy, the color yellow stimulates our self-esteem and helps fight phobias. It symbolizes joy and creativity, even wealth. It can stimulate a good mood and most importantly, illuminate the space.

It is not necessary to choose a strong shade of course, because a soft shade of yellow can create a wonderful atmosphere of calm in the living room. Indeed, an intense shade of yellow can be tiring, while with a softer shade you will not face such problems. You can also combine it very nicely with orange, painting the walls with the two colors alternately. The result will be happy, lively and special!

3. Beige painting

And since we are talking about discreet colors, let’s not forget this color, which gives moderation and stability. Beige is a color that expresses a friendly mood and reliability. Combine it with brown elements in the space, to create a unique living room in earth tones. Do not be afraid if it will be in fashion and time, because its value is timeless.

You can choose a light shade, to evenly illuminate the space and make it look bigger. Even if your furniture does not have earthy shades, you will hardly find that they do not match harmoniously with the beige. So, if your question is “what color should I paint my living room to match all my furniture?”, You have the answer.

4. Gray painting

The king of industrial style. It is a distinctive color, which depending on the shade you choose, can be highlighted or disappeared. What do we mean? That you can choose a light shade of gray, to illuminate the space more harmoniously and to highlight the look of the furniture.

On the other hand, choosing a darker shade of gray, your walls will not go unnoticed and will be a piece inextricably linked to the decoration of your living room. So you should not be afraid of it, or consider it boring, because it combines harmoniously with most colors and offers different results, depending on the shade you choose.

5. Light blue painting

If you are an anxious type and need calm and relaxation when you get home, blue is an excellent choice for you. The blue helps to concentrate the thought, relaxes and stabilizes the mood. This is why it is often preferred as a color for office walls.

If, of course, you feel you need its properties, why not take advantage of it to paint your living room? A wall painted in light shades of green, such as lime, can have similar effects. Especially if the furniture in your living room has shades of white, gray, beige and brown, these colors can highlight the space, without creating “noise” and discord.

6. Petrol painting

This particular color has made a name for itself in recent years and has won over loyal fans. Petrol is a special combination of blue and green, which if you use it properly in the living room, you will want to try it in other rooms of the house!

Petrol, although soothing on the face, is a dark color that can darken the space, if used extensively. Its main advantage is that it matches a wide range of colors and furniture and can have many combinations.

Try petrol with beige on the walls of the living room for harmony in the space or petrol with ocher for a more modern result. Do not forget to think of the so-called dusty pink as a candidate partner of petrol, if you want to have a romantic and chic image in your living room.

7. Green painting

According to feng shui it is the color of renewal and growth and should not be missing from your living room. Its shades are really endless and can suit any space. From mint or olive green to cypress, choose the right shade depending on the brightness and size of your living room.

In addition, combine it with earthy shades to definitely have a warm and bright living room.

8. Orange painting

If your living room needs a sense of joy and warmth, then orange is the choice for you. It has antidepressant properties and expresses friendship, trust and optimism. As a warm color, it offers light and warmth to the room, while at the same time giving a sense of vitality to family members.

Especially if your furniture has dark shades, you will love the brightness that your living room will gain with orange color on the walls. As already mentioned, the combination of orange with light yellow can also offer brightness at the same time with the feeling of joy in the space, breaking the monotony.

9. Purple painting

The purple color expresses balance and calm. Especially in light shades, such as violet, it highlights the elegance of the space and the spirituality in the character of the people who live in the house. It is ideal for you, if your furniture has light shades, such as white, beige, light yellow, light green. However, it will be difficult to combine with dark elements of the space, because it can limit the brightness of the space.

Choosing a lighter, or darker shade of purple, will bring completely different results for the aesthetics of your living room, so you should carefully consider your alternatives. So, if you are wondering “what color should I paint my living room to be really special?”, Purple is a choice you should consider to paint the living room.

10. Coffee painting

Brown is a color that indicates stability and warmth. As a basic earthy color, it highlights comfort, the emphasis on friendship and trust. These are the main reasons why it is worth giving it a place in your living room. If you are afraid that a dark brown color on your walls can reduce the brightness of the space, you can only turn to a balanced combination of brown with other colors.

Indicatively, you can paint the walls of the living room brown with gray, with beige, with white. As you can see, the meaning is that the space needs a brighter color to ensure balance.

In addition to your living room, you are looking for the answer to the question “What color should I paint my room?”. Read the article we prepared and discover 10 fantastic ideas to transform it!

Painting the living room

Still wondering what color to paint your living room, depending on its individual needs? The solution you are looking for is in the hands of an experienced and reliable professional who can give you advice.

Read more about home painting:

11 Tips for bathroom renovation

11 Tips for bathroom renovation

There are 2 reasons why someone decides to move on to bathroom renovation. The first and most enjoyable is for aesthetic and the second for psychological reasons. A change in our home, in basic spaces that are used more often, such as the bathroom, renews us, because it gives new breath to our space and consequently to us.

A renovation works, after its end, as a psychotherapist as it raises our psychology and the mood to return to our home, to our nest to enjoy the change. That is why this change must be successful in every way! The second reason (and far from it) is that there is some damage or leakage, which often makes a renovation mandatory. No evil pure good, of course.

There is some basic information you need to know about the workflow of a renovation and we are here to take you through our experience 11 tips to not succeed, just to succeed!

1. Visualize your new bathroom

You have in front of you an empty canvas, which you can paint with the most beautiful colors. This is your bathroom and you can now remodel it as you wish. Would you like a colored or earthy result? Modern tiles or vintage? Did you try pressed cement mortar? Browse decoration magazines and surf on Pinterest to immerse yourself in the style you would like your new bathroom to have. The choice will be much easier for you, as well as for the seller who will serve you, since in this way you will have given him the information he needs to direct you much more specifically and targeted.

2. Check the piping

Before the renovation, a technician should check if the water supply and sewerage pipes of your bathroom are good or need to be replaced. For example, if the installation has been done in the past with an iron pipe (it was widely used until about 1985), it most likely needs a change, because its lifespan is 25-30 years. This is a very important step, which you may not have calculated in the cost but consider changing the tiles and in a short time the pipes will puncture and you will have to start all over again.

The installation of the new tiles on the old ones, while it is done and is a solution of easy change, however, involves a risk, since in case there is any problem with the tiles or the piping in the future, everything will have to be removed.

3. Redesign the layout in your bathroom

After renovating, it would be good to think if you want to change places in the sanitary ware and the laundry or they are comfortable as they are. Many times in old bathrooms the location of the sanitary ware has not been done based on practicality or elegance and the result damages the bathroom.

For example, the basin is not nice to be placed directly opposite the door and be the first thing you see when entering the bathroom.

Also if you want to put a built-in cistern, built-in batteries or underfloor heating, you must have decided before laying the tiles.

4. Insulate the built-in shower

Lastly, the trend in bathroom design and practicality requires the replacement of the bathtub with a shower. This way you save space. But there is something you need to be very careful about. In case you do not want to install a porcelain or acrylic shower and you want to make it built, you must insulate it very well, especially if the house is on a floor.

Think that the water is very difficult to hold and at some point it will remove moisture from underneath if proper insulation / waterproofing has not been done.

5. Watch out for the tiles you buy

All the tiles may seem the same to you and you want to buy the cheapest, but their differences are huge and their quality is crucial for their durability. Many times a cheap tile will eventually cost you double, so it is wise to choose materials that do not change easily.

If you do not want to spend a lot of money, look for tiles from good factories that have been removed and so have very good offer prices and less those that are cheap from the beginning.

Avoid white and generally very light tiles on the bathroom floor because you will always be with the mop under your arms!

6. Use anti-mildew putty

Many people may not know it, but in recent years, there is a special putty on the market, which prevents the formation of mold, fungi and bacteria. Especially in the bathtub / shower area, where the putties turn black over time and you need If you clean them constantly, this grout is a savior.

Of course it is more expensive than plain putty, but you can use it only on the places that usually mold and be sure that you will not regret this decision anywhere.

7. Give light

In a renovation, it is necessary to check the electrical installations, especially if they are old but also to get extra light if it is not enough for makeup, shaving, etc. Hidden lighting also “gives” to the premises and creates zen notes, for example when you enjoy a relaxing shower gel and you do not want strong light in.

Finally, if there is no natural light in the space, it is better to choose a light color of tiles to “illuminate” the bathroom.

8. Select the smart grid

The grill that has saved every woman who faints at the sight of a cockroach! Remove your old grill with the classic holes that always remain open with one that closes. With a simple movement, open and close it whenever you want. It is also very convenient for villages and cottages that are not inhabited permanently and various (malicious) insects lurk.

9. Use plaster around the ceiling

The plaster finishes at the junction of the wall tiles with the ceiling (when there is a loft), perfect the result and camouflage the imperfections from crooked walls, which almost every house has. If you do not have a loft, the tiles stop just above the height of the door and the remaining piece is painted.

10. Protect your cabin from debris from the beginning

Technology, fortunately for us, is constantly evolving. With the new products for nanotechnology cabin glass, -which for the best possible result must be passed before using the shower-, you do not worry about the salts that settle. Use it once and it lasts from months to 10 years (depending on the product), reducing the cleaning time by up to 90%. After passing it, they do not need any cleaners. Keep your cabin just like the first day of your bathroom renovation. Ideal for hotels.

11. Support bathroom furniture and basin

The basin is the most practical object of the bathroom and its choice should not be made only in terms of aesthetics or even worse in terms of price. There are very cheap basins on the market, but after using them you realize their problems, such as that they may not pull well with a push on the cistern or that the porcelain turns yellow very easily where water falls. These are unfortunately found after the holiday. To avoid, as much as you can, this possibility, it would be good not to go for the cheapest model but at a medium price.

As for the bathroom furniture, it is what gives character to the whole bathroom and is the protagonist. It is important to be beautiful but also practical, in terms of storage space. The trend also imposes the “hanging” furniture, which does not “tread” on the floor. Thus, there is the illusion that you are saving space and cleaning under them is much easier than floor furniture.

How long does a renovation take?

Of course for a clear answer to this question, we need to know the needs and size of your bathroom. However, in general, this type of work, in its entirety, takes about a week. Normally, these days it is not possible to use the toilet.

However, if you already live inside, what we ask from the specialized workshops we work with is that the bathroom should not be left without a basin for any day. So at the end of the day of dismantling the tiles and sanitary ware, the old basin is re-installed for your service and until the new one is installed, almost at the end of the renovation.

Read more about bathroom renovation:

Show Buttons
Hide Buttons